亚博在线登陆首页

网站地图 | 网站收藏 | 水箱博客
 
 
 

发布时间:2013-05-10 00:02:15
 

   SMC组合式水箱是由SMC模压单板深,密封材料艘,金属紧固件及配管系统组合拼装而成舍,可根据用户需要组装1-1000m3的水箱避龟枪。本水箱适用工矿企业单位生活及消防用水牡恢盘,民用住宅及公共建筑办堕蝎,以及对水质要求较高的食品饱遁荆、医药偷娇鸽、卫生等贮水设施螺寿。
SMC玻璃钢组合式水箱单板规格悼、性能及扫执行标准
SMC模压单板规格祈讳:1000×1000mm梅挖、1000×500岗捆、500×500mm暖。
厚度有5mm剖、8mm醇仓烂、10mm灯轨咯、12mm辑辽沽、14mm享辱谩,16mm想,其中5mm厚度单板专作水箱盖板硷耍。
SMC模压单板经机械化成型其性能如下蔷好桔:拉伸强度≥60MPa哨勾幸,弯曲强度≥100MPa蟹鸽,弯曲模量≥7.0GPa敲仍,巴氏硬度≥60橙磨坚,吸水度≤1.0%,玻璃纤维含量≥25%乌。
SMC组合式水箱质量执行中华人民共和国建材行业《JC-658.1-1997》标准雇。
SMC组合式水箱卫生标准执行中华人民共和国《GB5749-85》标准窗。
SMC组合式水箱安装调试皇吵徘:水箱基础可采用混凝土条形梁耗坊,或工字钢搐薪。水箱顶部对角设有透气空气过滤装置冻型唇。水箱内部均使用拉筋叔汀。各管口法兰均为1.0MPa标准法兰沃。在布置水箱位置时菱,应参照GB17051-1997二次供水设施卫生规范饥材。
SMC sectional water tank is held together by the SMC molded board, sealing materials, metal fasteners and piping system combinations can be assembled according to user needs-1000m3 tank. The tank for industrial and mining enterprises in life and fire water, residential and public buildings, as well as higher water quality requirements of food, medicine, health and other storage facilities.
SMC FRP sectional water tank veneer specifications, performance and sweep the implementation of standards
SMC molded veneer Specifications: 1000 × 1000mm, 1000 × 500,500 × 500mm.
Thickness 5mm, 8mm, 10mm, 12mm, 14mm, 16mm, 5mm thickness of the veneer is designed for the tank cover.
The SMC molded veneer molded by the mechanization of its properties are as follows: tensile strength ≥ 60MPa, the bending strength of ≥ 100 MPa, flexural modulus ≥ 7.0GPa Barcol hardness ≥ 60, water absorption ≤ 1.0%, the glass fiber content of ≥ 25%.
SMC sectional water tank quality of the implementation of the People's Republic of China's building materials industry "JC-658.1-1997 standard.
SMC sectional water tank hygiene standard GB5749-85 standard of the People's Republic of China.
SMC sectional water tank installation and commissioning: the tank base concrete strip beam can be used, or I-beam. Top of the tank on the corner has breathable air filtration devices. Inside the water tank using the stretch. Each nozzle flange are 1.0MPa standard flange. In the layout of the location of the tank, you should refer to GB17051-1997 secondary water supply facilities, sanitation norms.

上一个产品:青岛不锈钢水箱

下一个产品:保温水箱

?